Neway Valve Refacers
Tungsten carbide will machine valve faces just as effectively as it machines valve seats.

Neway's VFR-1000 motorised valve refacer will do everything that a traditional valve grinder will do, and more.
This variable speed machine is just as accurate as a grinder, or more so, is much cleaner (no coolant mess), and costs about half as much as a good quality valve grinder.
The VFR-1000 has a variable cutting angle with 3 positive stops at 0, 30 & 45 degrees.

If the VFR-1000 has more capacity than you really need, then the "GIZMATIC" valve refacer might be just the thing.
The "Gizmatic" is Neway's hand operated unit for refacing valves. It employs tungsten carbide blades that are similar to those used in Neway's seat cutters.
The "Gizmatic" 3 has 2 fixed angles 30 & 45 degrees.
Why replace when you can reface!? With the "Gizmatic", you can finish the job right now - no more waiting around for the right replacement valve to show up.
Gizmatic 3 specifications
2 sided valve cutter
45 & 30 degree fixed angles
Automatic centering on soft jaw V-blocks
Feed handle
Stem size range 4mm - 10mm
Valve size range 16mm - 50mm

30 degree side 45 degree side